Making An Oval Dining Table

Author: Writers | Categories: Ideas for Dining Table comments
Replica Oval Dining Table

Build your own oval dining table is a project you can finish in just a weekend week. Do it yourself instead of buying a prefabricated in a shop has several advantages.

Instructions of making an oval dining table:

  1. Buy a large wooden panel 3/4 inch (1.9 cm) thick, the type you want. Hardwood is better if you want to give a natural finish.
  2. Use the jigsaw to cut the oval-shaped panel. The easiest way to do it is to draw a large rectangle and round ends.
  3. Cut the 4×4 wood poles with a saw to form the four legs. Give the height you want it to have the table.
  4. Cut the wood panels 6 x 1 inches (15.24 x 2.54 cm) in four square panels measuring 6 x 6 inches (15.24 x 15.24 cm). They serve to connect the legs to the table.
  5. Place the oval dining table top face down on a clean surface. Joining the legs in each of the corners, leaving a small gap from the edge.
  6. Turn the table. Use the level to make sure it is right.
  7. Sand the entire table, including the legs.
  8. Apply a coat of varnish and wait to dry according to package directions.
RELATED:   Expandable Dining Table Ikea

Comments are closed.